upload
United States Bureau of Mines
Industry: Mining
Number of terms: 33118
Number of blossaries: 0
Company Profile:
The U.S. Bureau of Mines (USBM) was the primary United States Government agency conducting scientific research and disseminating information on the extraction, processing, use, and conservation of mineral resources. Founded on May 16, 1910, through the Organic Act (Public Law 179), USBM's missions ...
A method of sintering iron ore. Sintering is carried out in a series of pans, 11 ft 6 in (3.5 m) square, with robust chromium vanadium steel grate bars, which have a life of 5 to 6 years. Advantages include low fuel consumption and absence of moving parts in the sintering zones.
Industry:Mining
A method of sizing finely ground, insoluble, homogeneous material or classifying ore particles. A weighed quantity is dispersed in liquid and allowed to settle for a timed period, a liquid fraction then being decanted. The treatment is repeated several times, the settled fraction now representing one size group (if homogeneous) or settled group (if minerals of various densities are present). The decanted fluid is similarly treated for progressively lengthened settling periods.
Industry:Mining
A method of smelting lead ore in which the characteristics are a large charge of lead ore, a quick roasting, a high temperature throughout, and the aim to extract all the lead in the reverberatory. The hearth inclines toward the middle of one of the sides, the lead collects in the furnace and is tapped at intervals into an outside kettle.
Industry:Mining
A method of steelmaking that involves the use of three processes, e.g., a sequence of melting in a cupola, blowing in a Bessemer converter, and finishing in a basic electric furnace, or a combination of the acid Bessemer converter, the basic open-hearth furnace, and the basic electric furnace.
Industry:Mining
A method of stoping employed on veins where the dip is not sufficient for the broken ore to be removed by gravity. The ore remains close to the working face and must be loaded into cars at that point.
Industry:Mining
A method of stoping in which the ore is extracted by excavating a series of horizontal (sometimes inclined) timbered slices alongside each other, beginning at the top of the orebody and working progressively downward; the slices are caved by blasting out the timbers, bringing the capping or overburden down upon the bottom of the slices that 3330 have been previously covered with a floor or mat of timber to separate the caved material from the solid ore beneath. Succeedingly lower slices are mined in a similar manner up to the overlying mat or gob, which consists of an accumulation of broken timbers and lagging from the upper slices and of caved capping.
Industry:Mining
A method of stoping in which the walls and back of the excavation are supported by a system of interlocking framed timbers (square set). A square set of timber consists of a vertical post and two horizontal members set at mutually right angles. The mining process is slow and only enough ore is excavated to provide room for installation of each successive set of timber. The stopes are usually mined out in floors or horizontal panels, and the sets of each successive floor are framed into the top of the preceding floor.
Industry:Mining
A method of stoping in which the walls and back of the excavation are supported by a system of interlocking framed timbers (square set). A square set of timber consists of a vertical post and two horizontal members set at mutually right angles. The mining process is slow and only enough ore is excavated to provide room for installation of each successive set of timber. The stopes are usually mined out in floors or horizontal panels, and the sets of each successive floor are framed into the top of the preceding floor.
Industry:Mining
A method of stoping in which the walls and back of the excavation are supported by a system of interlocking framed timbers (square set). A square set of timber consists of a vertical post and two horizontal members set at mutually right angles. The mining process is slow and only enough ore is excavated to provide room for installation of each successive set of timber. The stopes are usually mined out in floors or horizontal panels, and the sets of each successive floor are framed into the top of the preceding floor.
Industry:Mining
A method of stoping in which the walls and back of the excavation are supported by a system of interlocking framed timbers (square set). A square set of timber consists of a vertical post and two horizontal members set at mutually right angles. The mining process is slow and only enough ore is excavated to provide room for installation of each successive set of timber. The stopes are usually mined out in floors or horizontal panels, and the sets of each successive floor are framed into the top of the preceding floor.
Industry:Mining
© 2024 CSOFT International, Ltd.